Zur Hauptnavigation / To main navigation

Zur Sekundärnavigation / To secondary navigation

Zum Inhalt dieser Seite / To the content of this page

Sekundärnavigation / Secondary navigation

Inhaltsbereich / Content

Head of the Institute of Particle Process Engineering

Prof. Dr.-Ing. Sergiy Antonyuk

Office Address

Building 44, Room 459
67663 Kaiserslautern


Phone: +49 (0)631 205 3524
Fax: +49 (0)631 205 3524
E-Mail: sergiy.antonyuk[at]mv.uni-kl.de

Personal Background

Since 2014
Professor, Head of the Institute of Particle Process Engineering at the University of Kaiserslautern
2008 to 2014
Scientific assistant professor, Institute of Solids Process Engineering and Particle Technology, Hamburg University of Technology
2006 to 2008
Postdoctoral fellow at the Otto-von-Guericke-University of Magdeburg (Germany)

Ph.D. in process engineering at the Otto-von-Guericke-University of Magdeburg: Deformation and breakage behaviour of spherical granules during compression and impact stressing, Supervisor: Prof. J. Tomas


Ph.D. in ecological safety at the National Technical University Kyiv (Ukraine): Processing of solid carbonaceous wastes for thermal processing in chamber ovens, Supervisor: Prof. O. Parfenyuk

M.Sc. in process equipment, National Technical University of Donetsk (Ukraine)
B.Sc. in mechanical engineering, National Technical University of Donetsk



Current Publications

  • Buhl, S., Breuninger, P., Antonyuk, S.: Optimization of a Laval nozzle for energy efficient cold spraying of microparticles, Materials and Manufacturing Processes (2017), http://dx.doi.org/10.1080/10426914.2017.1279322.
  • Weis, D., Niesing, M., Thommes, M., Antonyuk, S.: Partikelkinematik in der Sphäronisation pharmazeutischer Pellets, Chemie Ingenieur Technik 89 (2017) 8, 1083-1091, http://dx.doi.org/10.1002/cite.201600154.
  • Schlegel, C., Chodorski, J., Huster, M., Davoudi, N., Huttenlochner, K., Bohley, M., Reichenbach, I., Buhl, S., Breuninger, P., Müller-Renno, C., Ziegler, C., Aurich, J., Antonyuk, S., Ulber, R.: Analyzing the Influence of Microstructured Surfaces on the Lactic Acid Production of Lactobacillus delbrueckii lactis in a flow-through cell system, Engineering in Life Sciences 8 (2017), 865-873, https://doi.org/10.1002/elsc.201700045.
  • Schmidt, K., Buhl, S., Davoudi, N., Godard, C., Merz, R., Raid, I., Kerscher, E., Kopnarski, M., Müller-Renno, C., Ripperger, S., Seewig, J., Ziegler, C. and S. Antonyuk: Ti Surface Modification by Cold Spraying with TiO2 Microparticles, Surface and Coatings Technology (2017), http://dx.doi.org/10.1016/j.surfcoat.2016.10.091.
  • Hellmann, A., Rief, S., Schmidt, K., Kocaman, R.T., Aibibu, D., Cherif, C., Ripperger, S., Antonyuk, S.: Simulation der Partikelabscheidung und des Druckverlustes von Schutz- und Filtertextilien bei einer Gasdurchströmung, F & S Filtrieren und Separieren 31 (2017) 4.
  • Schmidt, K., Ripperger, S., Antonyuk, S.: 3D DEM-CFD Simulation of the formation of a fixed bed of activated carbon grains, air and toluene permeation and toluene adsorption, Chemie Ingenieur Technik 88 (2016) 3, 307-312, http://dx.doi.org/10.1002/cite.201500146.
  • Eckhard, S. Fries, M., Antonyuk, S., Heinrich, S.: Dependencies between internal structure and mechanical properties of spray dried granules - experimental study and DEM simulation, Advanced Powder Technology, (2016), http://dx.doi.org/10.1016/j.apt.2016.09.008.
  • Dosta, M., Dale, S., Antonyuk, S., Wassgren, C., Heinrich, S. and J. D. Litster: Numerical and experimental analysis of influence of granule microstructure on its compression breakage, Powder Technology (2016), http://dx.doi.org/10.1016/j.powtec.2016.05.005.
  • Aman, S., Mueller, P., Tomas, J., Kozhar, S., Dosta, M., Heinrich, S., Antonyuk, S.: Combined viscoelastic and elastic wave dissipation mechanism at low velocity impact, Advanced Powder Technology (2016), http://dx.doi.org/10.1016/j.apt.2016.04.012.
  • Crüger, B., Heinrich, S., Antonyuk, S., Deen, N.G. and J.A.M. Kuipers:  Experimental study of oblique impact of particles on wet surfaces, Chemical Engineering Research and Design (2016), http://dx.doi.org/10.1016/j.cherd.2016.01.024
  • Crüger, B., Salikov, V., Heinrich, S., Antonyuk, S, Sutkar, V.S., Deen, N.G. and J.A.M. Kuipers:  Improved experimental approach for accurate measurement of the coefficient of restitution, Particuology 25 (2016),1-9. http://dx.doi.org/10.1016/j.partic.2015.04.002.
  • Sutkar, V.S., Deen, N.G., Patil, A.V., Salikov, V., Antonyuk, S., Heinrich, S. and J.A.M. Kuipers: CFD-DEM study of heat and mass transfer in a spout fluidized bed with liquid injection, Chemical Engineering Journal 288 (2016), 185-197, http://dx.doi.org/10.1016/j.cej.2015.11.044
  • Vetter, A., Ripperger, S., Antonyuk, S.: Magnetische Separation feinster Partikel aus Flüssigkeiten, Filtrieren und Separieren 30 (2016) 1, 66-72.
  • Petersen, L., Hamm, H., Feser, F., Ripperger, S. und S. Antonyuk: Beeinflussung der Filtration geflockter Quarzmehlsuspensionen durch ein elektrisches Feld. Filtrieren und Separieren 30 (2016) 1, 17-20.